Filter schließen
 
  •  
  •  
1 von 7
Für die Filterung wurden keine Ergebnisse gefunden!
NEU
Synergy 21 3D filament Feinkrepp / fine crep Synergy 21 3D filament Feinkrepp / fine crep
Feinkrepp für 3D Drucker als Haftunterlage Breite: 100mm Lange: 50m Dicke: 0,14mm Temperaturbeständigkeit: 90°C

Bestand: 0
NEU
Fiberlogy 3D Filament FiberWood Braun 1,75 mm Fiberlogy 3D Filament FiberWood Braun 1,75 mm
Printing temperature: 190-210 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,750kg To avoid a situation where the nozzle gets...

Bestand: 0
NEU
Fiberlogy 3D Filament PLA Mineral Natur 1,75 mm Fiberlogy 3D Filament PLA Mineral Natur 1,75 mm
Printing temperature: 190-210 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament FiberFlex 40D Gelb 1,75 mm Fiberlogy 3D Filament FiberFlex 40D Gelb 1,75 mm
Print temperature: 200 – 220°C Bed temperature: 50 – 70 °C Printing speed up to 45 mm/s with direct extruder Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament FiberFlex 40D Rot 1,75 mm Fiberlogy 3D Filament FiberFlex 40D Rot 1,75 mm
Print temperature: 200 – 220°C Bed temperature: 50 – 70 °C Printing speed up to 45 mm/s with direct extruder Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament FiberFlex 40D Schwarz 1,75 mm Fiberlogy 3D Filament FiberFlex 40D Schwarz 1,75 mm
Print temperature: 200 – 220°C Bed temperature: 50 – 70 °C Printing speed up to 45 mm/s with direct extruder Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament HD PLA Inox 1,75 mm Fiberlogy 3D Filament HD PLA Inox 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Inox 1,75 mm Fiberlogy 3D Filament Easy PLA Inox 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Schwarz 1,75 mm Fiberlogy 3D Filament Easy PLA Schwarz 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Weiss 1,75 mm Fiberlogy 3D Filament Easy PLA Weiss 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Pink 1,75 mm Fiberlogy 3D Filament Easy PLA Pink 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Blau 1,75 mm Fiberlogy 3D Filament Easy PLA Blau 1,75 mm
Drucktemperatur: 200-220 °C Betttemperatur: 50-70ºC (bei Verwendung von beschichteten Platten oder anderen Mitteln zur Erhöhung der Haftung ist die Erwärmung des Bettes nicht erforderlich) Durchmesser: 1,75mm Nettogewicht: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Grün 1,75 mm Fiberlogy 3D Filament Easy PLA Grün 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament Easy PLA Rot 1,75 mm Fiberlogy 3D Filament Easy PLA Rot 1,75 mm
Printing temperature: 200-220 °C Bed temperature: 50-70ºC (when using plates or other means to increase the adhesion, the heating of the bed is not required) Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy Filamento 3D PET-G Vertigo 1,75 mm Fiberlogy Filamento 3D PET-G Vertigo 1,75 mm
Printing temperature: 230-250 °C Bed temperature: 90ºC Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament PET-G Schwarz 1,75 mm Fiberlogy 3D Filament PET-G Schwarz 1,75 mm
Printing temperature: 230-250 °C Bed temperature: 90ºC Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament PET-G Weiss 1,75 mm Fiberlogy 3D Filament PET-G Weiss 1,75 mm
Printing temperature: 230-250 °C Bed temperature: 90ºC Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Fiberlogy 3D Filament PET-G Graphit 1,75 mm Fiberlogy 3D Filament PET-G Graphit 1,75 mm
Printing temperature: 230-250 °C Bed temperature: 90ºC Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
NEU
Synergy 21 3D filament PLA /solid / 1.75MM/ Yellow Synergy 21 3D filament PLA /solid / 1.75MM/ Yellow
dia 1,75mm tolerance: ±0,05mm print temp: 210-235°C melt point: 200°C net weight: 1Kg Spool:dia 20cm, hight: 7cm, inner hole: 6cm

Bestand: 0
NEU
Fiberlogy 3D Filament PET-G Burgund TR 1,75 mm Fiberlogy 3D Filament PET-G Burgund TR 1,75 mm
Printing temperature: 230-250 °C Bed temperature: 90ºC Diameter: 1,75mm Net weight: 0,850kg

Bestand: 0
ALLNET 3D Drucker zbh. Raft, Tape, Marke kip FEINKREPP 300, 50m, 100mm Breite ALLNET 3D Drucker zbh. Raft, Tape, Marke kip FEINKREPP 300, 50m, 100mm Breite
Extra breites Klebeband für 3D Drucker geeignet. Länge 50m x 100mm Länge 50m x 100mm Gute Klebebeständigkeit, auch auf Heizbetten. Geeignet für alle Materialeien wie PLA, ABS, Hips, PTG etc.

Bestand: 0
Synergy 21 3D filament TPU/flexible /1.75MM/ red Synergy 21 3D filament TPU/flexible /1.75MM/ red

Bestand: 0
Synergy 21 3D filament TPU/flexible /1.75MM/ blue Synergy 21 3D filament TPU/flexible /1.75MM/ blue

Bestand: 0
EOL
Synergy 21 3D filament ABS /Fluorescence  /1.75MM/ Fluorescence Yellow Synergy 21 3D filament ABS /Fluorescence /1.75MM/ Fluorescence Yellow
dia 1,75mm, tolerance: ±0,05mm, print temp: 190-220°C, melt point: 230°C, net weight: 1Kg, Spool:dia 20cm, hight: 7cm, inner hole: 6cm

Bestand: 0
1 von 7
Zuletzt angesehen