LeMaker Guitar Bundle Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+

LeMaker Guitar Bundle Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+
LeMaker Guitar Bundle Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+
   
Artikelbilder ähnlich, können von der Produkt-Beschreibung abweichen!

Preise zzgl. gesetzlicher MwSt.
zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

    Downloads

    Datenblatt ES
    Datenblatt

  • Artikel End of Life
  • 0
  • 126435
  • ALLNET
  • LeMaker_Guitar Rev.B+_Bundle
  • 4038816071507
  • 0.1kg
  • 12 Monate
  • Fragen zum Artikel?
LeMaker Guitar Bundle mit Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+... mehr
Produktinformationen "LeMaker Guitar Bundle Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+"

LeMaker Guitar Bundle mit Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+ LeMaker Guitar ist ein kosteneffizienter Single Board PC, der vom LeMaker-Team (BananaPi) entwickelt wurde. Das besondere an diesem Board ist die Trennung zwischen Trägerboard und Mainboard. CPU und Speicher sind getrennt von der Peripherie und können kostengünstig durch ein neues Upgrade ersetzt werden (z.Zeit noch nicht verfügbar). Android 5.1.1 vorinstalliert und "out of the box" mit 7 Zoll Touchscreen betriebsbereit. 

Hardware Specification of LeMaker Guitar Mainboard  
SoC Actions S500
CPU ARM® Cortex-A9R4 Quad-Core1.3 GHz(ARM v7 instruction set)
GPU PowerVR SGX544
DDR SDRAM 1GB DDR3 SDRAM
PMU ATC2603C is an integrated power management and audio subsystem which provides a cost effective,single-chip solution for portable multimedia systems.ALL the information from Master is configured through TWIinterface of ATC2603C.The audio signal  communicate via I2S Bus with the Master.
On board Storage 8GB eMMC
LCD Interface Select LVDS/ RGB/MIPI
Expansion Interface  204 pins stanard DDR3 SODIMM 
Appearance Characteristic  
Sizes 67.6mm*42.2mm
Weight 10g
Hardware Specification of LeMaker Guitar Expansion Base Board  
ROM 1KB EEPROM
Ethernet PHY The standard RJ45 Ethernet port for LAN connection supports 10/100Mbps speed.
Wi-Fi Supports IEEE 802.11 b/g/n 
MicroSD Card slot Support MicroSD Card
Display StandardHDMI Type A, supports up to 4096*2048@30HZ LVDS-DSI for raw LCD panels(up to 4096 x 2048) Composite video output (via 3.5 mm TRRS jack shared with Analogaudio out)
Video StandardHDMI Type A, supports up to 4096*2048@30HZ
4K HD video decoding
1080P@60fps HD video encoding
Supports MPEG-4, H.263, H.264 and other mainstream video formats
Audio HDMI output
 
Analog audio (via 3.5 mm TRRS jack shared with composite video out)
 
I2S audio output (also available as audio input)
 
Onboard MIC input
Micro USB3.0 Host/Device Micro USB3.0 support Host and Device
USB2.0 Host  High speed standard A type connector x 2 ports
Camera Interface MIPI-CSI
Parallel 8-bit camera interface
IR Receiver This is a remote control receiver module that can accept standard 38Khz carrier frequency based 
wireless data in 9012, NEC(8bit) , RC5, RC6(mode)format.
40 Pin GPIO Headers 40 Pins Header,28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S, ADC, FM-IN
SODIMM 204Pin Connector Standard DDR3 SODIMM 204P connector ,used for connect LeMaker Guitar core board
Debug COM  COM3 used for developing debug 
Power Source 5~12V / 2A input, Plug specification is inner diameter 2.1mmand outer diameter 5.5mm
Power Button  Buttonfor power on/off
Power/Status LED Power status LED (red)
User defined LED1 (green)
Appearance characteristic  
Sizes 88mm x 88mm
Weight 58g
Weiterführende Links zu "LeMaker Guitar Bundle Quad-Core 1.3 GHz, 1GbDDR3 Ram, Prozessorboard und Baseboard B+"
Verfügbare Downloads:
Zuletzt angesehen