FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p

FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p
FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p
FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p
     
Artikelbilder ähnlich, können von der Produkt-Beschreibung abweichen!

Preise zzgl. gesetzlicher MwSt.
zzgl. Versandkosten

Introduction Overview Front Back   The NanoPi M1 is... mehr
Produktinformationen "FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p"

Introduction

Overview

Front

Back

 

  • The NanoPi M1 is an Allwinner H3 based ARM board designed and released by FriendlyARM for hobbyists, makers and electronic fans. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, Debian and etc.
  • The NanoPi M1 uses the Allwinner H3 Soc. It integrates Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It can be powered via the MicroUSB port
  • In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi compatible 40 pin GPIO pin header.

Hardware Spec

  • CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz
  • GPU: Mali400MP2@600MHz,Supports OpenGL ES2.0
  • DDR3 RAM: 512MB/1GB
  • Connectivity: 10/100M Ethernet
  • Audio: 3.5mm audio jack/Via HDMI
  • Microphone: Onboard microphone
  • IR Receiver: Onboard IR receiver
  • USB Host:Type A, USB 2.0 x 3
  • MicroSD Slot x 1
  • MicroUSB: for data transmission and power input, OTG
  • Video Output: HDMI 1.4 1080P, CVBS
  • DVP Camera Interface: 24pin, 0.5mm pitch FPC seat
  • Debug Serial Port: 4Pin, 2.54mm pitch pin header
  • GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
  • User Key: Power LED x 1, Reset x 1
  • PC Size: 64 x 56mm
  • Power Supply: DC 5V/2A
  • Working Temperature: -30? to 70?
  • OS/Software: u-boot,Ubuntu MATE,Debian

compact01

Software Features

uboot

  • mainline uboot released on May 2017
  • supports fastboot to update uboot

UbuntuCore 16.04

  • mainline kernel: Linux-4.11.2
  • rpi-monitor: check system status and information
  • npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login,and enabling/disabling i2c, spi, serial and PWM
  • networkmanager: manage network
  • system log output from serial port
  • auto-login with user account "pi" with access to npi-config

Debian Jessie

  • welcome window with basic system information and status
  • npi-config: system configuration utility for setting passwords, language, timezone, hostname,

Android

  • supports USB WiFi

Diagram, Layout and Dimension

Layout

NanoPi M1 Layout

  • GPIO Pin Spec
Pin# Name Linux gpio Pin# Name Linux gpio
1 SYS_3.3V   2 VDD_5V  
3 I2C0_SDA/GPIOA12   4 VDD_5V  
5 I2C0_SCL/GPIOA11   6 GND  
7 GPIOG11 203 8 UART1_TX/GPIOG6 198
9 GND   10 UART1_RX/GPIOG7 199
11 UART2_TX/GPIOA0 0 12 GPIOA6 6
13 UART2_RTS/GPIOA2 2 14 GND  
15 UART2_CTS/GPIOA3 3 16 UART1_RTS/GPIOG8 200
17 SYS_3.3V   18 UART1_CTS/GPIOG9 201
19 SPI0_MOSI/GPIOC0 64 20 GND  
21 SPI0_MISO/GPIOC1 65 22 UART2_RX/GPIOA1 1
23 SPI0_CLK/GPIOC2 66 24 SPI0_CS/GPIOC3 67
25 GND   26 SPDIF-OUT/GPIOA17 17
27 I2C1_SDA/GPIOA19/PCM0_CLK/I2S0_BCK 19 28 I2C1_SCL/GPIOA18/PCM0_SYNC/I2S0_LRCK 18
29 GPIOA20/PCM0_DOUT/I2S0_SDOUT 20 30 GND  
31 GPIOA21/PCM0_DIN/I2S0_SDIN 21 32 GPIOA7 7
33 GPIOA8 8 34 GND  
35 UART3_CTS/SPI1_MISO/GPIOA16 16 36 UART3_TX/SPI1_CS/GPIOA13 13
37 GPIOA9 9 38 UART3_RTS/SPI1_MOSI/GPIOA15 15
39 GND   40 UART3_RX/SPI1_CLK/GPIOA14 14
  • Debug Port(UART0)
Pin# Name
1 GND
2 VDD_5V
3 UART_TXD0/GPIOA4
4 UART_RXD0/GPIOA5/PWM0
  • DVP Camera IF Pin Spec
Pin# Name Description
1, 2 SYS_3.3V 3.3V power output, to camera modules
7,9,13,15,24 GND Gound, 0V
3 I2C2_SCL I2C Clock Signal
4 I2C2_SDA I2C Data Signal
5 GPIOE15 Regular GPIO, control signals output to camera modules
6 GPIOE14 Regular GPIO, control signals output to camera modules
8 MCLK Clock signals output to camera modules
10 NC Not Connected
11 VSYNC vertical synchronization to CPU from camera modules
12 HREF/HSYNC HREF/HSYNC signal to CPU from camera modules
14 PCLK PCLK signal to CPU from camera modules
16-23 Data bit7-0 data signals

Note:

  1. SYS_3.3V: 3.3V power output
  2. VDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB’s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
  3. All pins are 3.3V and output current is 5mA. It can drive small loads. No IO pins can drive a load.
  4. For more details refer to the document: NanoPi-M1-1603B-Schematic.pdf

Board Dimension

NanoPi-M1-1603B-dimensions.png

For more details please refer to: pcb file in dxf

Weiterführende Links zu "FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p"
Zuletzt angesehen