ALLNET Switch unmanaged industrial 8 Port Gigabit 200W / 8x PoE+ / DIN / "ALL-SWI8180P"

IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure,
IEEE802.3af for POE
IEEE802.3at for POE+

Switch Architecture

Back-plane (Switching Fabric): 16Gbps

Data Processing

Store and Forward

Flow Control:

IEEE 802.3x Flow Control and Back Pressure

Jumbo Frame

9KB

MAC address Table Size

1K

Packet Buffer Size

1M

Network Connector :

8xRJ-45 10/100/1000BaseT(X) auto negotiation,
8 Giga POE+ 802.3at/af PSE 30W per port
Auto MDI/MDI-X function, Full/Half duplex             

Network Cable

UTP/STP Cat.5e or above Cable

EIA/TIA-568 10-ohm (100m)

Protocol

CSMA/CD

LED

PW1(Power 1) Green,
PW2(Power 2) Green,
SW(relay) Amber,

TX/RJ-45 port:
LNK (Link/Active) Green,
Amber: POE Detected

Housing

Heavy Metal Housing

Reserve polarity protection

Present

Overload current protection

Present

Power Supply

Redundant Dual DC 12V-56V without POE
POE input 48-56VDC

Power Consumption

5.76W@48 VDC full load, Without POE

Alarm Relay Contact

Relay outputs with current carrying capacity of 1 A @24VDC,  
Relay in open circuit mode when 2 powers are connected. in short circuit mode when only one power supply is connected

POE power

POE power per port 30watts. Maximum 36Watts
Maximum total power 200Watts, with 56VDC input, Supports IEEE802.3af/at

Removable Terminal Block

Provide 2 Redundant power, Alarm relay contact ,6 Pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm

Operating Temperature

-40° ~ 75° fully tested.

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40°~85°

MTBF (mean time between failure)

510,304 hrs ( MIL-HDBK-217F) at 25°C

Housing

Rugged Metal ,IP30 Protection

Case Dimension (L x W x D)

142mmx36.2mmx105mm (LxWxD)

Installation mounting

DIN Rail mounting and Wall Mounting

Certifications:

EN55022/24

ITE equipment

EN55011

Industrial, Scientific and Medical (ISM) equipment

EMC/EMS 

CE, FCC, VCCI

EMI

FCC Part 15 Subpart B Class A,
CE EN 55022 Class A