FriendlyELEC NanoPi M1 - QuadCore Allwinner H3 3xUSB HDMI 1080p

Introduction

Overview

Front

Back

• The NanoPi M1 is an Allwinner H3 based ARM board designed and released by FriendlyARM for hobbyists, makers and electronic fans. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, Debian and etc.
• The NanoPi M1 uses the Allwinner H3 Soc. It integrates Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It can be powered via the MicroUSB port
• In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi compatible 40 pin GPIO pin header.

Hardware Spec

• CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz
• GPU: Mali400MP2@600MHz,Supports OpenGL ES2.0
• DDR3 RAM: 512MB/1GB
• Connectivity: 10/100M Ethernet
• Audio: 3.5mm audio jack/Via HDMI
• Microphone: Onboard microphone
• IR Receiver: Onboard IR receiver
• USB Host:Type A, USB 2.0 x 3
• MicroSD Slot x 1
• MicroUSB: for data transmission and power input, OTG
• Video Output: HDMI 1.4 1080P, CVBS
• DVP Camera Interface: 24pin, 0.5mm pitch FPC seat
• Debug Serial Port: 4Pin, 2.54mm pitch pin header
• GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
• User Key: Power LED x 1, Reset x 1
• PC Size: 64 x 56mm
• Power Supply: DC 5V/2A
• Working Temperature: -30? to 70?
• OS/Software: u-boot,Ubuntu MATE,Debian

Software Features

uboot

• mainline uboot released on May 2017
• supports fastboot to update uboot

UbuntuCore 16.04

• mainline kernel: Linux-4.11.2
• rpi-monitor: check system status and information
• npi-config: system configuration utility for setting passwords, language, timezone, hostname, SSH and auto-login,and enabling/disabling i2c, spi, serial and PWM
• networkmanager: manage network
• system log output from serial port
• auto-login with user account "pi" with access to npi-config

Debian Jessie

• welcome window with basic system information and status
• npi-config: system configuration utility for setting passwords, language, timezone, hostname,

Android

• supports USB WiFi

Diagram, Layout and Dimension

Layout

NanoPi M1 Layout

• GPIO Pin Spec

• Debug Port(UART0)

• DVP Camera IF Pin Spec

Note:

1. SYS_3.3V: 3.3V power output
2. VDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB’s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
3. All pins are 3.3V and output current is 5mA. It can drive small loads. No IO pins can drive a load.
4. For more details refer to the document: NanoPi-M1-1603B-Schematic.pdf

Board Dimension

For more details please refer to: pcb file in dxf