Wireless LAN - Antennen-Adapter

Wand-Masthalterung mit Schwenk/Neigefunktion für Outdoor-Accesspoint mit Rund-Aufnahme wie ALL0256N/ALL0258N/Ubiquiti Nanostation etc.

The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg. It?s simple and low cost. Supports SXT, Omnitik, BaseBox or any other pole mountable device. The adapter is very durable due to it?s special plastic material composite - anvilNITE (TM). Product code QMP Dimensions 95x88x112mm Tube diameter 35 mm Max tube diameter to which mount can be attached 65 mm Maximum antenna weight 1.5 kg Maximum wind load 100 N Turn angle for Mikrotik products 140° Compatible devices SXT series, Omnitik, 3rd party antennas that are designed to be pole mounted Material anvilNITE?

Set besteht aus 2 Kabelpeitschen mit Buchse auf Lan/Ethernet Kabel mit jeweils einmal DC/Hohlstecker Buchse und einmal Stecker 5.5mm / 2,1mm. Passives PoE, kein echtes PoE - Stromquelle muss auf Gerät ausgelegt sein und das Gerät muss einen Hohlstecker als Strom-Eingang haben.

Product code QME Dimensions 102x135x150 mm Tube diameter 35 mm Max tube diameter to which mount can be attached 70 mm Maximum antenna weight 8 kg Maximum wind load 100 N Turn angle for MikroTik products 190° Compatible devices Any pole mounted antenna with weight under 8kg Mounting holes 4 (option to add 2 more) Operational temperature Range ±40° C Material anvilNITE?

RF Elements PassivePoE™ Injector V2

N-Type Buchse (female) <-> N-Type Buchse (female)

SMA-Male to SMA-Female, 1~2000 MHz, Insertion loss, +/- 0,5dbi, VSWR +/- 1,2, Nominal Discarge Current +/- 10kA, max. Discarge Current +/- 20kA, Transmission Power = 200, Temp -25° ~ +70°, Impendance 50Ohm,

N-Type Stecker (male) <-> N-Type Stecker (male)

The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°. With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage. You can use the quickMOUNT with any pole mountable device with weight less than 1.5 Kg simple and low cost supports SXT, Omnitik, BaseBox or any other pole mountable device supports up to two SXT units The adapter is very durable due to it?s special material composite - anvilNITE (TM) Product code QM Dimensions 96x107.5x56 mm Tube diameter 35 mm Max tube diameter to which mount can be attached 65 mm Maximum antenna weight 1.5 kg Maximum wind load 100N Compatible devices SXT series, Omnitik, 3rd party antennas that are designed to be pole mounted Turn angle for Mikrotik products 190° Operational temperature range ±40° C Material anvilNITE?

SMA Buchse (female) <-> SMA Stecker (male)

Mikrotik Zubehör quickMOUNT for SXTsq products

RF Elements StationBox® InSpot ? indoor enclosure StationBox® InSpot is indoor enclosure designed for build- ing of wireless hotspots. StationBox® InSpot directly supports MikroTik? RouterBoard? RB912, RB711 and RB411, also accomodates integrated RB751s and RB951s. InSpot enables installation on the firm wall or on the ceiling tile. Materials ABS plastic Operating Temp. -30 to +60 °C Flame Rating UL 94 HB Ceiling Tile Thickness 10 - 14 mm Weight 0.7 Kg / 1.5 lbs ? single piece incl. package 15.2 Kg / 33.5 lbs ? carton (20 pcs) Single Unit Retail Package: 6 × 23,5 × 25 cm 20 Units Carton Box: 63 × 50 × 28 cm

N-Type Buchse (female) <-> N-Type Stecker (male)

SMA (male) <-> N-Type (male)

R-SMA Buchse (F) <-> N-Type Stecker (male)

Dimensions 95x88x112mm Tube diameter 35 mm Max tube diameter to which mount can be attached 65 mm Maximum antenna weight 1.5 kg Maximum wind load 100 N Turn angle for MikroTik products 140° Compatible devices LHG 5

SMA Buchse (female) <-> N-Type Stecker (male)

WLAN.eu Antennen-Adapter R-SMA Stecker (M) auf N-Type Stecker (M)

RF Elements EasyBracket? 912 mounts MikroTik BaseBox, NetBox and NetMetal on UBNT or RF elements Sectors EasyBracket? 912 is mounting bracket that allows installation of MikroTik? BaseBox, NetBox and NetMetal on UBNT AirMAX? Sectors, RF elements® Sectors and other antennas with compatible radio bracket. EasyBracket? 912 is made of high quality ABS plastic. Materials UV stabilized and weather resistant ABS plastic Screws - Stainless Steel Operating Temp. -30 to +60 °C Wind Survival 160 Km/h Weight 0.02 Kg / 0.05 lbs ? single piece incl. package 8.3 Kg / 18.3 lbs ? carton (500 pcs) Single Unit Plastic Bag: 7,4 × 14,8 × 1,2 cm 500 Units Carton Box: 51 × 25 × 27 cm

Wird an den nicht genutzten Antennenanschluß eines 3G/LTE Router angeschlossen und verhindert Einstreuungen und Störungen, die die Qualität der Verbindung beeinflussen können.   Dieser Terminator gaukelt auch dem Router einen Anschluß einer 2ter Antenne vor.

F-Stecker (male) <-> R-SMA Buche (female)

SMA Buchse (female) <-> N-Type Buchse (female)

FME-Buchse (f) auf SMA Buchse (f)