ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G

Vorschau: ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G

Artikelbilder ähnlich, können von der Produkt-Beschreibung abweichen!

Preise zzgl. gesetzlicher MwSt.
zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Downloads

EU RoHS und REACH Erklärung

Bestand: 0
Artikel-Nr.: 221097
Hersteller: ALLNET
Hersteller Artikel-Nr.: ALL-SGC5410PM-10G
Gewicht: 1kg
Garantie: 24 Monate
Fragen zum Artikel?

Highlights: 8x 2.5GbE PoE Ports 2x SFP+ 10G Ports for Uplink Support PoE IEEE802.3af /... mehr

Menü schließen

Produktinformationen "ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G"

Highlights:

8x 2.5GbE PoE Ports
2x SFP+ 10G Ports for Uplink
Support PoE IEEE802.3af / at with max. 30W per Port
PoE Budget 240W
Supports Jumbo Frames
Support IGMP snooping v1/v2/v3
Support Link aggregation
Support Loop protection
Support Spaning Tree Protocoll (STP) and Rapid Spanning Tree (RSTP)
Funktioniert als eigenständiger Switch oder mit Apollo Controller (siehe ALL-AC100)

Es gibt immer mehr Anwendungen, die einen schnelleren Ethernet-Switch benötigen. ALLNET Apollos MultiG Switches unterstützen schnellere Wi-Fi 6/6E/7 APs, beschleunigen große Datei-Uploads und -Downloads, machen Videokonferenzen flüssiger und verhindern Jitter.

2.5G / 10G Devices Ecosystem

Application

Multi-GE

Feature

Die Uplink-Bandbreite von WLAN-APs wurde von 2,5 Gbit/s in 802.11ac auf 5 Gbit/s oder 10 Gbit/s erhöht. Herkömmliche Gigabit-Zugänge können die Uplink-Bandbreitenanforderungen von APs nicht erfüllen. Die Multi-GE-Switches von Emplus unterstützen 100M*/1/2,5Gbps und sogar 5G/10Gbps (SMX-Serie) Auto-Sensing und erfüllen damit die Bandbreitenanforderungen von Hochgeschwindigkeits-Wireless-APs in der Wi-Fi 6-Ära. Als Antwort auf den Wi-Fi-Standard der nächsten Generation (Wi-Fi 7) wird die Multi-GE-Switch-Familie von Emplus mit Wi-Fi 7-Funktionen in Kürze erhältlich sein.

Multi-GE-Switch-Ports mit Auto-Negotiation für Geschwindigkeiten von 100Mbps, 1Gbps, 2,5Gbps und 5Gbps über bestehende Cat5e-Kabel und bis zu 10-Gbps über neuere Cat6a-Kabel (siehe Tabelle unten).

Cable	1 G	2.5G	5 G	10G
Cat5e	•	•	•	N/A
Cat6	•	•	•	• (55m)
Cat6a	•	•	•	•

*100Mbps unterstützt keinen Halbduplexmodus

Spanning Tree Protokoll (STP)

Unterstützt Standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) für schnellere Konvergenz.

Loop protection

Wenn der Switch eine Schleife erkennt, sperrt er den Quellport für die Weiterleitung von Datenpaketen, die vom Switch stammen, um Broadcast Storms zu vermeiden.

Jumbo-Frame-Unterstützung

Unterstützt bis zu 10K Bytes Frame-Größe zur Verbesserung der Leistung bei großen Datenübertragungen.

IGMP-Snooping v1/v2/v3

Verbessert die Netzwerkleistung durch Multicast-Filterung, anstatt den Datenverkehr auf allen Ports zu überfluten.

Link-Aggregation

Fasst mehrere Ports bis zu einem Maximum von acht (8) Ports pro Trunk automatisch mit dem Link Aggregation Control Protocol (LACP) zusammen.

Software Features - Apollo

System Information

System Name

System Location

System Contact

System System Features

IPv4 Settings
-IP address / Subnet mask
-DHCPv4

IPv6 Settings
-Global address
-Link-local address
-DHCPv6

Domain Name System (DNS)
-IPv4 (Support 4 Servers)

Port

Port Configuration
-Speed configuration
-Flow control (802.3x, back pressure)
-Port description (support 128 bytes)
-Port extend mode

IEEE 802.3az Energy Efficient Ethernet (EEE)

MAC Address Table
-MAC address table (16K)
-Age Time
-Static MAC address

Jumbo Frame
-Per-Port/Per-system (9216 bytes)

Spanning Tree
-802.1w rapid spanning tree
-802.1s multiple spanning tree
-MSTP instance (16 instances)
-Per device BPDU forward
-Per port BPDU forward
-Per port BPDU Filter
-Per port BPDU Guard
-Per port Root Guard
-Edge port mode
-Point to Point mode
-Per port admin state

Loopback detection
-STP independent + port base shutdown only

Multicast Filtering
-Unknown Multicast Drop (unregistered multicast filtering)
-Unknown Action-Drop/Flood/Router Port

Multicast Group
-Support Max. multicast group (256 groups)

IGMP Multicast Forwarding
-MAC Group Address FDB

IGMP Snooping
-Support v1, v2, v3 awareness
-IGMP snooping fast leave (per-vlan)
-IGMP querier
-Dynamic router port
-Static/Forbidden router

MLD Multicast Forwarding
-MAC Group Address FDB
-IP Group Address FDB

MLD Snooping
-Support v1
-MLD snooping fast leave (per-vlan)
-MLD querier
-Dynamic router port
-Static/forbidden router

802.3ad Link Aggregation
-Static Trunk
Max. 8 ports/group
Max. 8 groups per device
-Dynamic Trunk (LACP)
Max. 8 ports/group
Max. 8 groups per device
-Load Balance Algorithm (source/destination MAC, VLAN, EtherType, source/destination IP address, TCP/UDP ports)
-LA description

802.1ab Link Layer Discovery Protocol (LLDP)

EOAM
-SFP information, SFP+ DDM
-Cable diagnostic
-Port statistics

DHCP

IPv4 DHCP Relay
-DHCP Relay
-Max. IPv4 DHCP servers
-Option82 Status
-Option82 Strategy (Keep/Replace/Drop)

IPv4 DHCP Snooping
-DHCP Snooping
-Binding list
-Statistics

VLAN

802.1Q Support

VLAN Group
-VID from 1-4094 (Max. 256 VLAN groups)

GVRP
-Dynamic VLAN groups
-Per port / device enable / disable
-VLAN advertisement

Voice VLAN

L3 Interface

Multiple IP Interface
-Max. 4 IP interfaces
-Max. 4 Ip v4 address
-20 IPv6 address (shared for both link local and global address)

ARP Table
-Max. 192 ARP entries

Static ARP
-Static 192 ARP entries (Share with ARP Table)

ARP Age Time

IPv6 Neighbor Discovery Table
-Max. 42 ND entries

Static IPv6 Neighbor Discovery
-Static 42 ND entries (Share with IPv6 Neighbor Discovery Table)

L3 Routing

IPv4 Static Route and Default Route
-Max. 63 entries

IPv4 Default Route
-Max. 1 entry

IPv4 Route Table

IPv6 Static Route
-Max. 21 entries

IPv6 Default Route
-Max. 1 entry

IPv6 Route Table

Interface specific select
-Per VLAN

RIP

OSPF

L3 IP Multicast

IGMP
-IP group address FDB

MLD
-IP group address FDB

QoS

Trust Mode
-Cos/802.1p
-DSCP
-CoS/802.1p-DSCP

Per Port Trust Mode
-Enable-follow the global trust type
-Disable-Always go to the lowest priority queue.

Queue
-Number of priority queues supported-8

CoS Mapping

CoS Based on 802.1p Priority

CoS Based on Physical Port

CoS Based on DSCP/TOS

Scheduling Mechanism
-Strict/WRR/Strict + WRR

Queue Weight Bandwidth

Bandwidth Control
-Rate limit according to network speed 16kbps~1000Mbps-in step of 16kbps

Advanced QoS

Security

802.1X Authentication Protocol
-Local/RADIUS/TACACS+

802.1X Port-based Access Control

802.1X Authenticated Hosts

802.1X Guest VLAN

RADIUS-VLAN assignment

EAP/RADIUS of Port Statistics

Port Security (Limited Dynamic Lock)

Storm Control
-Support broadcast/unknown multicast/unknown unicast 16kbps~1000Mbps - in step of 16kbps

Port Isolation (Protected Ports)

DOS Attack Prevention

Access Control List (ACL)
-Ingress/Egress
-MC Based ACL
-IPv4 Based ACL
-IPv6 Based ACL
-MAC Range Mode
-IP Range Profile
-ACL Binding
-Action-Permit/Deny/Shutdown/Rate Limit

Management VLAN

Radius Server
-IPv4 / IPv6 / hostname(IPv4)

AAA

Security Password
-Requires a user to generate a new means of authentication before access is granted to the device for the first time.

PoE management
-Power on/off per port
-Power class configuration (autoclass/userdefine)
-Power feeding with priority
-Power budget limit

PD LifeGuard

Account Manager
-Muti Privileges

Web Graphical User Interface (GUI)
-HTTP IPv4 / IPv6
-HTTPS IPv4 / IPv6

Web support multi-language
-Language support

SNMP v1/v2/v3 Support

RMON 1, 2, 3, 9
-Support 4 groups of RMON (1-statistics, 2-history, 3-alarms, 9-events)

SSH Server
-IPv4/IPv6

AAA

Telnet Server
-IPv4/IPv6

TFTP Client
-IPv4/IPv6

Port Mirroring
-Support 1 to 1 and many to 1
-Max. mirroring session-3
-Tx/Rx/both mirroring

Dual Images

Image upgrade/backup
-Firmware upgrade (TFTP/HTTP)

Configuration upgrade/backup
-TFTP/HTTP

Configuration Saving
-Manual/Auto Save

System Time
-Time setting/daylight saving

Simple Network Time Protocol (SNTP)
-IPv4/IPv6/hostname(IPv4) SNTP server
-Daylight Savings Time
-Port number for SNTP server

Web UI Supports Non-IE Browser
-Chrome, Firefox, Safari

SYSLOG
-Support log admin password/IP change activity enhancement
-Local logging-buffered/flash
-Remote logging-IPv4/IPv6/hostname(IPv4)
-Originator Identifier-None/Hostname/Ipv4/Ipv6/User Defined

SYSLOG Backup
-Buffered

Ping
-IPv4/IPv6/hostname(IPv4)

Trace Route
-IPv4/IPv6/hostname(IPv4)

Factory Default

Reboot Switch

Flick Reboot

MIB Support

MIB II
-RFC1213

Bridge
-RFC1493

RMON
-RFC1757

802.1p
-RFC2674

LLDP MIB
-RFC2863

Pubic Mib From Cloud Agent
-ReadOnly

Physical Interfaces

Multi GE PoE Switch
ALL-SGC5410PM-10G
330 x 44 x 230 mm

Technical Details:

Multi GE PoE Switch

	ALL-SGC5410PM-10G
Copper Ports	8x 2.5GbE
SFP Ports	-
SFP+ Ports	2x 10GbE
PoE Available Ports	8
PoE Standard	802.3af/at
PoE Power Budget	240W
Switch Chip	RTL9302C
PHY	GPY241
PoE Controller	RTL8238B
Flash Memory	16MB NOR 128MB NAND
SDRAM Memory	512MB DDR3
Packet Buffer	12Mbit
MAC Table Size	16K
Switching Capacity	80Gbps
Fan(s)	2
Power Supply	Int. PSU 300W
Dimensions (W x H x D)	330 x 44 x 230
Operating Temperature	0°C to 50°C

Produktmerkmale:

Anzahl Ports PoE/LAN:	8/0
Belüftung Switch:	Mit Lüfter
Einsatzort Switch:	19"
LAN Geschwindigkeit:	1Gbit/s, 2,5GBit/s, 100 Mbit/s
Management:	Apollo Series (Apollo Controller) , full managed
PoE Budget:	<300 Watt
PoE Port Leistung:	30W at
SFP Geschwindigkeit:	SFP+ 10GBit
SFP Port Anzahl:	2

Weiterführende Links zu "ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G"

Verfügbare Downloads:

Produkt Video

Dieser Inhalt wird von einer dritten Partei zur verfügung gestellt (www.youtube.com). Beim Anzeigen des externen Inhalts akzeptieren Sie die Nutzungsbedingungen von www.youtube.com Präferenzen speichern * * Ihre Auswahl wird in einem Cookie von shop.allnet.de gespeichert