ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"

ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"
ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"
ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"
ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"
ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M"
Artikelbilder ähnlich, können von der Produkt-Beschreibung abweichen!

Preise zzgl. gesetzlicher MwSt.
zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Highlights:  16 port Gigabit Layer2+ full managed switch architecture.  Supports... mehr
Produktinformationen "ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M""


  •  16 port Gigabit Layer2+ full managed switch architecture.
  •  Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection
  •  Supports back-pressure (half duplex), flow control (IEEE 802.3x and IEEE 802.3az Energy Efficient Ethernet)
  •  VLAN 4K Static / Port-Based / Tagged Based / Protocol / Voice VLAN / 802.1ad Q-in-Q
  •  Link Aggregation static link / LACP / Algorithm MAC based or IP based
  •  IGMP Snooping 256 groups IGMP v1/v2/v3, Fast Leave
  •  QoS (QoS>QoS multi-label, queue config, QoS mapping)
  •  Stormcontrol
  •  Total fanless, no more annoying noises...
  •  19 "inch angle or wall/table mounting possible

ALL-SG8618M is a 16* 10/100/1000M RJ45 ports and 2*100/1000M SFP fiber slot ports L2+ managed Ethernet fiber switch , built-in 35W power supply. Support 1U/19 inch rack installation.It is programmed for advanced switch management functions such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. It provides a quick, safe and cost-effective Ethernet network solution for small businesses and enterprises.

Solution for IPv6 Networking
With the IPv6/IPv4 dual stack and other management functions, ALL-SG8618M is the best choice for IP CCTV surveillance, VoIP and wireless solution providers to develop the IPv6 network. Meanwhile they help the SMBs to upgrade their network infrastructures to the IPv6 era without any extra investment.

Robust Layer 2 Features

ALL-SG8618M can be programmed for advanced Ethernet fiber switch management functions, such as port aggregation, Q-in-Q VLAN, Spanning Tree Protocol, QoS, bandwidth control, ERPS IGMP/MLD snooping etc. The ALL-SG86xx series allows the operation of a high-speed trunk combining multiple ports.

Powerful Security Functions
ALL-SG8618M provides a comprehensive access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

Enhanced Security and Traffic Control
ALL-SG8618M supports DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.

User-friendly Secure Management
For efficient management, ALL-SG8618M is a managed switch, equipped with console, web and SNMP management interfaces. With management interface, ALL-SG8618M offers an easy-to-use, platform independent management and configuration facility. ALL-SG8618M supports SNMP and it can be managed via any management software based on the standard SNMP v1 or v2 Protocol. Meanwhile ALL-SG8618M offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover,ALL-SG8618M offers the remotely secure management by supporting SSH, SSL and SNMP v3 connection where the packet content can be encrypted at each session.

Intelligent SFP DDM Function
ALL-SG8618M support SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

 Fast Recovery Redundant Ring for Critical Network Applications

The ALL-SG8618M supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms.

1588 Time Protocol for Industrial Computing Networks

The ALL-SG8618M is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.

Technical Details:

Model ALL-SG8618M
Copper Ports 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Fiber Ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode
Console Ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 36Gbps/non-blocking
Throughput 23.819Mpps @64 bytes
Address Table 8K entries
Share Data Buffer 4.0 Mb
Jumbo Frame 9600 Bytes
Flash Memory 128Mb
Flow Control IEEE 802.3x pause frame for full-duplex,Back pressure for half-duplex
Reset Button > 2 sec: Factory default and reset
Power Supply 100~240V AC, 50/60Hz, 4A (max.)
Power Consumption 12V, 45watts/1122 BTU
LED Indicators Power: Green

Solid on- power work normal, off- power disconnected

System: Green

Blink-work normally, solid on- soft work abnormal, fast Blink- soft upgrade

10/100/1000T RJ45 Interfaces (Port 1 to Port 16): 1000 LNK/ACT (Green), 10/100 LNK/ACT (yellow)

Blink- port connected with data transmission; Solid on- port connected without data transmission

100/1000Mbps SFP Interfaces (Port 17 to Port 18): Green

Blink- port connected with data transmission; Solid on- port connected without data transmission

EMC Surge Immunity: IEC61000-4-5

ESD Protection: ESD IEC61000-4-2: EFT IEC61000-4-4

Dimension 440x240x44.5mm
Weight 3.2kg
Working Temperature -10°C to 45°C
Storage Temperature -20°C to 70°C
MTBF 50,000hrs

Layer 2 functions

Port configuration Auto-negotiation

Flow Control

Port Mirror: TX/RX/BOTH; Many-to-1 monitor

CPU Mirror

Traffic statistics

Link Aggregation Static link aggregation

LACP(Dynamic Trunk/Static Trunk)

Algorith based on Source/Destination MAC

Algorithm based on Source/Destination IP

MAC Table Aging Time

Static MAC address

Dynamic MAC address management

VLAN 4094 Active VLANs

4094 VID

802.1Q Tag VLAN


Protocol VLAN


Voice VLAN

802.1ad Q-in-Q tunneling

Private VLAN (Protected port)



L2, L3 e L4

Time-based ACL




User-Defined ACL


Spanning tree 802.1D Spanning Tree Protocol (STP)

802.1w Rapid Spanning Tree Protocol (RSTP)

802.1s Multiple Spanning Tree Protocol (MSTP)

Loop Guard

Root Guard


BPDU Guard

BPDU Filter

Ring Protection <20ms G.8032 ERPS Ring

Fast Ring

Multicast 256 groups

IGMP v1/v2/v3 Snooping, Fast Leave

MLD Snooping

Multicast VLAN

IGMP filter


Multicast Routing

QOS 8 mapping IDs to 8 level priority queues

CoS port-based

CoS 802.1p-based

CoS DSCP-based

Scheduling algorithms SP, WRR, SP+WRR

Storm Control (Broadcast, Multicast, Unknown Unicast)

Bandwidth control per port

SWRR, DWRR for Scheduling

Flow Redirect



Rate Limiting(Ingress/Egress)

Stri Priority

Security Features Port Security

MAC address filter

ARP Association (Manual, ARP scanning, DHCP snooping)

ARP Protection



DoS (Denial of Service)

Classification of packages based on: End.MAC, IP End, TCP / UDP Ports,

Protocol Type;

802.1x Authentication (port-based e MAC-based)

TACACS/TACACS+ Authentication

RADIUS Authentication

DHCP Filter

Guest VLAN



Restriction of WEB access based on: IP Address, And. MAC and Port;

Port Isolation

Loopback detection

Management SNMP v1/v2c/v3 with Full Private MIBs

RMON 4 groups


CLI (Telnet, Console, SSHv1/v2)

Firmware upgrade via console/web/TFTP

Configuration Backup/Reload

Dual Firmware


Configuration Export/Import

CDP Aware

OAM (IEEE802.3ah)

CFM (IEEE802.1ag)


Telnet client



Support IEEE1588v2 transparent clock
Other Features DNS Client

DHCP Relay

DHCP Client

DHCP Snooping

DHCP Option 66

DHCP Option 67

DHCP Option 82




Maintenance Cable Diagnostics


SFP DDM (Digital Diagnostics Monitoring)

Thermal protection

System log (Local and Remote)

Memory and CPU Monitoring

Tracert /Tracert 6

 Layer 3 functions

Static Routing IPv4 Unicast: Static Routing(Software Base)

IPv6 Unicast: Static Routing(Software Base)

IPV6 IPv6 neighbor discovery (ND)

Path maximum transmission unit (MTU) discovery

Internet Control Message Protocol (ICMP) version 6





Interface IPV6



Anzahl Ports PoE/LAN: 0/16
Belüftung Switch: Lüfterlos
Einsatzort Switch: 19"
Management: full managed
SFP Geschwindigkeit: SFP 1GBit
SFP Port Anzahl: 2
Weiterführende Links zu "ALLNET Switch full managed 16 Port Gigabit / 16x LAN / 2x SFP / Lüfterlos / 19" / "ALL-SG8618M""
Verfügbare Downloads:
Zuletzt angesehen